VGA 666 Adapter Board with HDMI Port for Raspberry Pi


Price: $8.47

(as of April 26, 2018 5:21 pm)


BUY FROM GEARBEST.COM


Shipping Cost: FREE SHIPPING



VGA 666 Adapter Board for Raspberry Pi

Description:
It is a neat and very useful solution for using a VGA screen / monitor with your Raspberry Pi. It is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins ( using a parallel interface ) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080P60 VGA video with no CPU load. It is also possible to drive this interface at the same time as the HDMI connection, so a dual screen set up is also possible.

Main Features:
● The Raspberry Pi has an HDMI port to connect a display. If your monitor only has VGA, you have to use an adapter
● With 6 bits per channel
● The VGA output supports resolution from 640 x 480 up to 1920 x 1024 at 60fps
● Support for Raspberry Pi A+, Raspberry Pi B+, Raspberry Pi Zero, Raspberry Pi 2, model B, Raspberry Pi 3 model B
Note: this add-on board uses all but 6 of the GPIO pins, so it may not be possible to use other add-on boards at the same time as the VGA adapter
Note: the expansion board showed in the picture is not included in the package
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

General

Type: VGA 666 Adapter Board for Raspberry Pi

Weight and Size

Product weight: 0.016 kg
Package weight: 0.040 kg
Product Size(L x W x H): 6.40 x 3.20 x 0.50 cm / 2.52 x 1.26 x 0.2 inches
Package Size(L x W x H): 12.00 x 5.00 x 2.00 cm / 4.72 x 1.97 x 0.79 inches

Package Contents

Package Contents: 1 x VGA 666 Adapter Board

You May Also Like